35
adjustment of the minimum
· The supply system is regularly grounded, according to the
regulations in force.
· The socket or the omnipolar switch can easily be reached after
the installation of the oven
· After carrying out the connection to the mains, check that the
supplying cable does not come into contact with parts subject to
heating.
· Never use reductions, shunts, adaptors which can cause
overheating or burning.
When the burner is set under a cooking top, the two appliances must
be connected separately, to make it easier to take the appliances out
and for electrical safety.
The manufacturer is not liable for any direct or indirect damage
caused by faulty installation or connection. It is therefore necessary
that all installation and connection operations are carried out by
qualified personnel complying with the local and general regulations
in force.