History Data Review Screen - Gima SPOT-CHECK PC-300 Guía De Uso

93

3.3 History Data Review Screen

On the measurement display screen, press and hold
as shown in figure 3.3.
Operation instructions:
1. Press and hold the
hearing one beep. The memory mark"
will appear (i.e. entering to review display screen).
The patient's ID number will blink at the same time.
2. A short press of the
patient's ID number.
3. A short press of the
and the recorded number (No.) will blink.
4. A short press of the
number to be recalled. The data displayed on the screen
is for the specific record of the patient that you selected.
Note: when selecting the patient ID, the screen only
displays patients with history data records.
, key, release the key after
/ key will browse the
key will confirm the setting,
/ key will set the recorded
ENGLISH
key to recall the stored data records,
Figure 3.3 History data review screen