Status Object (Class 0X65) - Aventics DeviceNet Instrucciones De Servicio

AVENTICS | DeviceNet | R402003659–BAL–001–AG
Table 25 Class and Instance Attributes – I/O Data Object
Object Object
Class Instance
0x64 0x03
0x64 0x05
Table 26 Common Services – I/O Data Object
Service Code
0x0E
0x10
The I/O Data Object is mapped into the Assembly Object by default.
13.4.2

Status Object (Class 0x65)

Table 27 Class and Instance Attributes – Status Object
Object Object
Class Instance
0x65 0x00
0x65 0x01
0x65 0x02
Table 28 Common Services – Status Object
Service Code
0x0E
Appendix – Bus master configuration
Object
Object description
Attribute
0x64 + i Output Data (Byte)
Output data as an individual Byte, with
32 bit output:
i = 0...3 –> Byte 0...3 of the output data
0x64 + i Output Data (Word)
Output data as an individual Word, with
32 bit output:
i = 0...1 –> Word 0...1 of the output data
Service Name
Get Attribute Single
Set Attribute Single
Object
Object description
Attribute
0x01 Revision
of the Status Object
0x02 Max Instance
Maximum number of instances for
Status Object
0x64 Manufacturer Status Register
Status of the system,
see Table 28 on page 87
0x65 Module Serial Number
Individual serial number of the bus
coupler
0x64 Diagnostic Data Length
Length of the diagnostic data
(see below: Diagnostic Data)
0x65 Diagnostic Status
Diagnostic status 1 byte
0x66... Reserved
...0x6D
0x6E Diagnostic Data
Diagnostic data: 1 byte,
see Table 30 on page 89
Service Name
Get Attribute Single
87