Assembly; Assembling The Cl03/Cl03-Xl With Bus Coupler - Aventics DeviceNet Instrucciones De Servicio

Number of valves controlled
DeviceNet
Certification
AVENTICS | DeviceNet | R402003659–BAL–001–AG
Up to 32 solenoids, in any suitable combination of double solenoid and
single solenoid valves, can be connected.
OSI The DeviceNet communication model is adapted to the ISO/OSI Basic
Reference Model.
Reference:
W
ISO 7498, Information Processing Systems –
Open System Interconnection – Basic Reference Model
CAN The lower layers of the Basic Reference Model are based on CAN.
All DeviceNet standards and guidelines can be found in the ODVA
specifications.
The device is certified according to the guidelines of the ODVA
Conformance Test A19.
Reference:
W
The CIP Network Library, Volume 1, Common Industrial Protocol
(CIP), Edition 3.3, November 2007
W
The CIP Network Library, Volume 3, DeviceNet Adaption of CIP,
Edition 1.5, November 2007
6

Assembly

6.1

Assembling the CL03/CL03-XL with bus coupler

Risk of damage to the manifold
The bus coupler may be damaged if the cover is exposed to
mechanical force, such as a hard blow.
O
Make sure that the device is protected from blows.
O
Make sure that the device is well packaged during transport.
You will receive your individually configured CL03/CL03-XL series valve
system completely fitted with all components:
W
Bus coupler
W
Valve system
W
End plate
The operating instructions accompanying the CL03/CL03-XL VS
describe in full how to assemble the entire valve system. The VS may be
mounted in any orientation. However, mounting the VS with the
connections upwards should be avoided if possible. Also avoid mounting
the VS with the pilot valves at the lower end.
NOTICE
61
Assembly