Module Control Object (Class 0X66); Module Control Register (Mcr) - Aventics DeviceNet Instrucciones De Servicio

90 AVENTICS | DeviceNet | R402003659–BAL–001–AG
Appendix – Bus master configuration
13.4.3

Module Control Object (Class 0x66)

Table 31 Class and Instance Attributes – Module Control Object
Object Object
Class Instance
0x66 0x00
0x66 0x01
0x66 0x02
Table 32 Common Services – Module Control Object
Service Code
0x0E
0x10
13.4.4

Module Control Register (MCR)

The behavior of the bus coupler can be changed with the Module Control
Register.
The default value of the register (after power-on) depends on the
position of the DIP switch S3.5 (see "Setting diagnostic messages" on
page 69):
W
S3.5 = OFF default value: 0x0000
W
S3.5 = ON default value: 0x0002
Object
Object description
Attribute
0x01 Revision
of the Module Control Object
0x02 Max Instance
Maximum number of instances for
the Module Control Object
0x64 Module Control Register (MCR)
Controls the behavior of the bus coupler,
see Table 33 on page 91
0x64 Parameter Data Length
Length of the parameter data
(see below)
0x65 Parameter Data
Identical to the Device Parameter
Data
0x66 Device Parameter Data
Diagnostics can (selectively) be switched
on and off, see Table 34 on page 93
Service Name
Get Attribute Single
Set Attribute Single