Fixation - Amann Girrbach ceramill zolid Instrucciones De Uso

For bridges with more than five units and bridges with massive inter-
mediate units, step-by-step long-term cooling to 500 °C is recom-
mended.
Staining and glazing
▷ Stain and glaze the units afterwards. We recommend using the
Amann Girrbach stain and glaze kit for this (please also refer to the
processing instructions of the stain and glaze kit).

Fixation

Conventional cementation:
Due to the high strength and stability of Ceramill Zolid frames, con-
ventional fixation with zinc-oxide phosphate cement or glass ionomer
cement (e.g., GC Fuji Plus) is possible in most cases.
▷ When applying conventional cementation, observe sufficient reten-
tion and a minimum abutment height of 3 mm!
Adhesive fixation:
For adhesive fixation, we recommend the bonding composite Pana-
®
via 21 or Panavia
the zirconium-oxide frame material.
Provisional cementation is not recommended, as the frames can be
subject to damage upon removal.
®
F 2.0, owing to the excellent bond strength with
F I X A T I O N
E N
33