Testing The Blanks; Application - Amann Girrbach ceramill zolid Instrucciones De Uso

T E S T I N G T H E B L A N K S

Testing the Blanks

Upon receipt, it is imperative to visually check the proper condition of
E N
the Ceramill Zolid blanks. After using a (transport-)damaged blank,
complaint claims are no longer possible.

Application

Indication ranges
_ Anatomically reduced crown and bridge frames in the anterior and
posterior tooth range, and monolithic (fully anatomical) crowns and
bridges.
_ Anatomically reduced bridge frames with a maximum of three con-
nected intermediate units in the anterior and two connected inter-
mediate links in the posterior region, and a maximum anatomical
length of 50 mm.
_ Monolithic bridges with a maximum of two connected intermediate
units in the posterior region, and a maximum anatomical length of
50 mm.
_ Cantilever frames and bridges with a maximum of one bridge pontic
(maximum one free-end pontic and no further than the second
premolar).
Indication limitation for Canada:
_ Single crowns
_ Front-tooth bridges
_ Posterior bridges with up to four units
26