Gima SPOT-CHECK PC-300 Guía De Uso página 82

Figure 2.9B Testing instruction
Refer to the provided User Manual of the "On Call Plus Blood Glucose Monitoring
System" for further detailed instructions.
Safety Instruction for Blood Glucose Measurement
 The provided test strips should be used with the On Call Plus Glucose Meter.
 Do NOT clean or disinfect finger with iodine.
 The calibration code must be the same with what on the packaging.
 The On Call Plus Glucose Meter will automatically switch to stand-by mode if a test strip is
not inserted for 1 minute.
 The testing strip will suck blood at one end automatically, do not make it sucking at both
ends.
ENGLISH
82