Temperature Measurement - Gima SPOT-CHECK PC-300 Guía De Uso

2.3.3 Temperature Measurement

The infrared temperature probe is a delicate transducer. To operate please follow these steps
and procedures. Failure to accurately operate may cause damage to the probes
1. The infrared temperature probe
Please place the infrared temperature probe in a stable ambient temperature for 30 minutes
before taking a measuring.
Measuring tip
of temperature probe
Temperature probe
cover
Battery
cover
Figure 2.7A sonda per la temperatura a infrarossi
Operation procedure:
1. Connect the infrared temperature probe to the connector on the upper side of device marked
"TEMP" ("PORT1" or "PORT2" for previous versions of the device). When the LCD screen
ENGLISH
Measuring
key
Display screen
Power on/off key
The display screen
Figure 2.7B
76