Cleaning And Disinfection Of The Main Unit - Gima SPOT-CHECK PC-300 Guía De Uso

105
automatic and seamless.
 If the battery is damaged, please replace it with a battery with "CCC" or "CE" mark. The
model and specifications of the battery should be the same as the original battery. The user
must ensure that the battery meets all applicable safety codes. The user can also contact the
distributor for service.

8.2 Cleaning and Disinfection of the Main Unit

 Switch off the monitor and disconnect the power cord before cleaning.
 Keep the monitor free from dust.
 It is recommended to regularly clean the outer shell and screen of the monitor. Only use a
non-corrosive cleanser such as clear water.
 Wipe the surface of the monitor and transducers with an alcohol impregnated wipe, and dry
with a clean cloth or just air-dry.
 Dilute the cleaner.
 Do NOT use scrubbing materials.
 The monitor can be disinfected. Please clear the monitor first.
 To avoid damage do not let liquid cleaner flow into the connector jack of the monitor.
 Clean the exterior of the connector only.
 Do NOT let any liquid flow into the shell or any other parts of the monitor.
 Do NOT leave any residue liquid or disinfectant on the surface of the monitor.
 Do NOT perform high pressure sterilization on the monitor.
 Do NOT immerse any parts of the monitor or its accessories in the liquid.
 If the monitor accidentally becomes wet, it should be thoroughly dried before use. The rear
cover can be removed by a qualified service technician to verify the absence of water.
ENGLISH