Chapter 5 Troubleshooting - Gima SPOT-CHECK PC-300 Guía De Uso

Chapter 5
TROUBLESHOOTING
Trouble
Ca not turn on the device
No blood pressure result
No SpO result
2
No TEMP result
ENGLISH
Possible reason
The built-in battery is drained
Battery is not installed
Some parts provided by other manufactu-
res are inserted to the connector
The cuff is wrapped around the arm
incorrectly
The windpipe is not correctly inserted to
the NIBP jack
The SpO probe is not plugged into the
2
"SpO " connector (or Port1 or Port2)
2
The temperature probe is not correctly
plugged into "TEMP" connector (or Port1
or Port2)
Taking measurements before "READY"
appears on the temperature probe screen
Solution
Recharge by connecting the power
supply adapter
Install the Lithium battery
Remove the related parts and try again
Wrap the cuff around the arm correctly
Insert the windpipe to the NIBP jack
Plug the SpO probe into the "SpO
2
connector (or Port1 or Port2)
Plug the temperature probe into
"TEMP" connector (or Port1 or Port2)
Do not take a measurement until
"READY" appears on the temperature
probe screen
100
"
2