Commissioning; Introduction; Purpose Of The Manual; For Your Safety - SICE S 200 Manual De Instrucciones

1. COMMISSIONING

1.1 INTRODUCTION

1.1.1. Purpose of the manual

The purpose of this manual is to provide the instructions necessary for optimum operation, use
and maintenance of your machine. If you sell this machine, please deliver this manual to the new
owner. In addition, in order to provide the customers with any necessary safety information, please
ask the new owner to complete and return to the manufacturer the ownership transfer form attached
to the previous page of this manual. Alternately, the new owner can send an email to info@sice.it.
This manual presumes that the technician has a thorough understanding of rim and tyre identification
and maintenance. He/she must also have a thorough knowledge of the operation and safety features
of all associated tools (such as the rack, lift, or floor jack) being utilized, and have the proper hand
and power tools necessary to work in a safe manner.
The first section contains basic information for the safe operation of the S 200 family of tyre
changers. The following sections contain detailed information about equipment, procedures,
and maintenance. Italics are used to refer to specific parts of this manual that offer additional
information or clarifications.
These references must be read in order to obtain information additional to the instructions provided.
The owner of the tyre changer is solely responsible for enforcing safety procedures and arranging
technical training. The tyre changer is to be operated only by a qualified and trained technician.
The owner or management is exclusively responsible for storing the documentation relative to
qualified personnel.
The S 200 family of tyre changers is designed for mounting, demounting and inflating tyres for
light vehicles (automobiles, not trucks or motorcycles) with a maximum diameter of 45 inches and
a maximum width of 15 inches.
Additional copies of this manual and the documentation enclosed with the machine can be
requested from the manufacturer, specifying the machine type and serial number.
CAUTION: Design details are subject to change. Some illustrations may vary slightly in appearance
from the machine you have.

1.2 FOR YOUR SAFETY

DESCRIPTION OF THE HAZARD
These symbols identify situations that could be detrimental to your safety and/or cause equipment
damage.
DANGER
DANGER: It indicates an imminent dangerous situation that, if not avoided, could lead to
serious injury or death.
Manuale d'uso S 200 91