Mounting The Rim's Standard Tyre - SICE S 200 Manual De Instrucciones

2. Perform disc penetration by using control
3. Start wheel rotation
. Rotate until the tyre is completely demounted.
It might be necessary to use the upper bead breaking arm with the bead breaking
unit rotated by 180° for rims with an internal channel.

2.4 Mounting the rim's standard tyre

Always use this "checklist" as a guide when mounting tyres to ensure proper service.
There are four basic steps when mounting a tyre to a rim:
• Position the bead on top of the mounting lip of the mounting/demounting head.
• Position the bead under the demounting lip of the mounting/demounting head.
• Lock the tyre to the rim in the mounting position.
Slip the bead into the rim channel.
These four basic demounting steps do not necessarily follow the same sequence,
however all four steps need to be performed to mount a tyre to a rim.
Manuale d'uso S 200
and simultaneously raise the lower disc a little at a time
CAUTION
135