Unauthorised Modification And Manufacture Of Spare Parts; Explosion Protection; Safety Precautions By The Owner - Ecolab Versatronic Instrucciones De Servicio

2.2.1

Unauthorised modification and manufacture of spare parts

CAUTION!
Unauthorised modifications or changes are permitted only after consultation
and with the permission of the manufacturer.
Original spare parts authorised by the manufacturer ensure safety.
The use of other parts excludes liability for the resulting
consequences.
2.2.2

Explosion protection

DANGER!
The device is not suitable for use in potentially explosive
environments.
2.3

Safety precautions by the owner

NOTICE!
Please note that the operator must train, instruct and monitor its operating
and maintenance personnel with regard to compliance with all necessary
safety precautions.
The frequency of inspections and control measures must be observed
and documented!
WARNING!
Requirements for system components provided by the operator
To avoid personal injury and damage to the system, it must be ensured that
the system components provided to you (pipe connections, flanges) have
been correctly installed. We recommend compensators for the transition
from plastic to stainless steel pipes in order to minimise loads during
installation and operation.
If the installation is not carried out by Ecolab Engineering GmbH Customer
Support / Service, steps must be taken to ensure that the pipe and
metering lines consist of the correct materials and meet the requirements
with regard to length and diameter.
19
Safety
417102269 Rev. 2-08.2020