Ecolab Versatronic Instrucciones De Servicio página 477

Setup dialogue - settings of the PC's USB interface
If several devices are connected via USB, select one device. You can also enable various
test criteria so that the connection is made to the device only if the test is successful.
This dialogue depends on the selected connection setting. This screenshot shows a "USB
connection". To get to this dialogue, from the dialogue "Device login", hold down
"Ctrl" + "Shift" and click "Next" twice.
Fig. 108: Setup dialogue - settings of the PC's USB interface
Settings
setting point
Connected devices
Name
Manuf. no.
CPU
Path
Extended
After clicking on "Finish" the assistant is finished and the new connection in the device
connection list is registered.
Selection / option
Select from drop-down list
Text
(Input field only if check box is
selected as active)
Call by pressing the button
205
PC setup program
Explanation
Device connected via USB are shown.
If the test is active, the device is only
connected when the device name matches.
If check is active, the device will only be
connected if the manufacturing number
matches.
If check is active, the device is only connected
when the serial number of the CPU matches.
If check is active, the device will only be
connected if the USB path matches.
Advanced settings for communication
These settings should be changed only in
exceptional cases.
417102269 Rev. 2-08.2020