Pc Setup Program; General - Ecolab Versatronic Instrucciones De Servicio

12

PC setup program

Data transfer to or from the device can be carried out only if the following
conditions are met:
– The device must be supplied with power
– All windows on the user interface of the device must be closed; the
device must be located at the operator level
Changes to the configuration or the parameter may not take place
simultaneously on the device and with the Ecolab PC Setup program.
12.1

General

With Ecolab PC Setup program all the data of the configuration and parameter setting can
be edited offline. Complete device configurations can be loaded onto the device, exported
from the device and stored on a PC/laptop.
Moreover, the software is required to do the following:
n Edit the user name and user rights in the unit
Ä Chapter 12.3.1 'Rights in the setup program' on page 192.
See
n Store and delete languages in the device (hidden in the default setup version)
Ä Chapter 12.8.3 'Country settings' on page 212.
See
n Set device lists for the user level, Create / Edit (hidden in the default setup version)
Ä Chapter 12.8.5 'User level' on page 217.
See
n Math and logic formulas, Create / Edit (hidden in the default setup version)
See Ä Chapter 12.8.6 'Mathematical formulas' on page 219.
Ä Chapter 12.8.7 'Logic formulas' on page 220.
See
Store and delete languages in the device (hidden in the default setup version)
n
Ä Chapter 12.8.8 'Customer-specific linearisation' on page 221.
See
n Edit buffer set tables for automatic buffer recognition when calibrating pH sensors
(hidden in the default setup version).
Ä Chapter 12.8.9 'Buffer set tables' on page 223.
See
n Create/edit process pictures (hidden in the default setup version)
Ä Chapter 12.8.10 'Process screens' on page 223.
See
n Configure the email function
Ä Chapter 12.8.11 'Email' on page 234.
See
n Configure the Web server (hidden in the default setup version)
Ä Chapter 12.8.12 'Web server' on page 235.
See
n Consider the calibration log book
Ä Chapter 12.8.13 'Calibration logbook' on page 236.
See
189
PC setup program
417102269 Rev. 2-08.2020