Storing The Machine; Replacing The Depth Wheel - Stihl FCS-KM Manual De Instrucciones

English
WARNING
The blade may begin to move as soon
as the engine starts. For this reason, blip
the throttle after starting – the engine
returns to idling speed.
Now follow the starting procedure
described in the basic power tool
instruction manual.
Stopping the Engine
See basic power tool instruction
N
manual.
16

Storing the Machine

For periods of 3 months or longer
Remove, clean and inspect the
N
cutting blade.
Store the machine in a dry, high or
N
locked location – out of the reach of
children and other unauthorized
persons.

Replacing the Depth Wheel

Have a worn depth wheel replaced by a
servicing dealer. STIHL recommends
that you have servicing and repair work
carried out exclusively by an authorized
STIHL servicing dealer.
Depth Wheel
2
The end of the thread on the
N
screw (1) is peened over to ensure
that the wingnut (2) does not work
loose and be lost.
A very high torque has to be applied to
remove the wingnut from the screw. If
the parts are then reassembled, the
captive function is no longer
guaranteed. In such a case have the
screw and wingnut replaced by a
servicing dealer.
1
FCS