Approved Basic Power Tools - Stihl FCS-KM Manual De Instrucciones

Always walk forwards when cutting,
N
do not pull the unit towards you.
Cut at a steady pace to avoid having
N
to make several passes.
1
Use the gunning sight (1) to line the
N
blade up with the edge of the bed.
FCS

Approved Basic Power Tools

WARNING
This interchangeable attachment is only
approved for use on a basic power tool
with a loop handle.
Operation of this interchangeable
attachment is permitted only with the
following basic power tools:
STIHL , FC 95, FC 110
–
STIHL FH 75
–
1) 2)
STIHL FS 85 R , FS 90 R,
–
2)
FS 110 R
2) 3)
STIHL HL 75 , HL 100
–
1)
Not approved on FS 85 R from
serial No. 2 49 848 196 up to
2 53 552 820
2)
Not approved on FS 85 RX,
FS 110 RX, HL 75 K or HL 100 K
3)
Not approved for mounting to
HL 75-0°, HL 100-0° without loop
handle
WARNING
Other combinations of the attachment
and non-approved basic power tools are
not permitted since they may result in
accidents or serious personal injury.
Retrofitting a Loop Handle
The following models must be retrofitted
with a loop handle:
STIHL HL 75, HL 100, version with
–
0° gearbox.
To retrofit the loop handle see chapter
on "Mounting the Loop Handle".
The loop handle need not be equipped
with a barrier bar.
2) 3)
English
11