Lubricating The Gearbox; Storing The Machine - Stihl FS 94 R Manual De Instrucciones

1
2
Fit cap (1), insert and tighten
N
screw (2)
FS 94 R

Lubricating the Gearbox

1
Check grease level after every 25 hours
of operation and re-lubricate if
necessary.
Remove the screw plug (1).
N
If no grease can be seen on the
N
inside of the screw plug (1): Screw
the tube (2) of STIHL gear lubricant
(special accessory) into the filler
hole.
Squeeze no more than 5 g (1/5 oz)
N
grease into the gearbox.
NOTICE
Do not completely fill the gearbox with
grease.
Unscrew the tube (2).
N
Insert the screw plug (1) and tighten
N
it down firmly.

Storing the Machine

For periods of 3 months or longer
Drain and clean the fuel tank in a
N
well ventilated area.
Dispose of fuel properly in
N
accordance with local
environmental requirements.
Run the engine until the carburetor
N
is dry – this helps prevent the
carburetor diaphragms sticking
together.
Remove, clean and inspect the
N
cutting attachment. Coat metal
cutting attachments with corrosion
inhibitor.
Thoroughly clean the machine.
N
Clean the air filter.
N
Store the machine in a dry and
N
secure location – out of the reach of
children and other unauthorized
persons.
English
33