Service And Maintenance; Cleaning And Care - Aventics PROFIBUS DP Instrucciones De Servicio

88 AVENTICS | PROFIBUS DP | R402003657–BAL–001–AG

Service and maintenance

9 Service and maintenance
Applied electric voltage and high pressure
Danger of injury from electric shock and sudden pressure
drops.
O
Make sure the system is not pressurized or connected to
power before carrying out any service or maintenance
work.
9.1

Cleaning and care

The unit may be damaged by solvents and aggressive
cleaning agents
The surface and seals may be damaged if aggressive
chemicals are used.
O
Only use solvents or detergents under short term
conditions.
O
Do not exceed the conditions of the IP69K protection
class.
The CL03/CL03-XL valve system and the bus coupler is
designed for wash-down areas, which means it can be leaned
with high pressure and high temperature (IP69K conditions). It
is resistant against most common cleaning detergents in low
concentrations for short term exposure.
For detailed information, contact the supplier of the solvents or
leaning detergents, or contact AVENTICS.
WARNING
NOTICE