Pak 150 Dx/300 Dx/500 Dx And Atex; Area Classification; Permitted Materials - Nederman E-PAK 150 DX Manual De Instrucciones

EN E-PAK 150 DX/300 DX/500 DX
1
1.1
1.2
24
9.2.1 Checking the direction of rotation
9.2.2 Checking the Y/D time setting
9.2.3 Checking the automatic start and stop function
9.2.4 Checking the filter cleaning function
9.2.5 Checking the vacuum limiting valve
9.3 Operation
.........................................................................................................................
9.3.1 Start/stop operation
9.3.2 Fault signals
9.3.3 Resetting fault signals
10 Maintenance
................................................................................................................................
10.1 Service and maintenance of ATEX equipment
10.2 Checks one month after installation and every year
10.3 Emptying the collector bin
10.4 Replacing the main filter, control filter and filter bags
10.4.1 Main filter and control filter
10.4.2 Individual filter bags
10.5 Fan service
10.5.1 Bearing replacement intervals
10.6 Spare parts
10.6.1 Ordering spare parts
11 Recycling
........................................................................................................................................
12 Troubleshooting
.........................................................................................................................
13 Acronyms and abbreviations
E-PAK 150 DX/300 DX/500 DX and ATEX
Area classification
E-PAK 150 DX/300 DX/500 DX is designed to extract combustible and non-
combustible dust, but the unit "as a whole" is not to be placed in an area that is
classified as a zone according to directive 1999/92/EC. It is only the inside of
the filter that meets ATEX requirements.
E-PAK 150 DX/300 DX/500 DX may be used with duct systems internally
classified as zone 20, 21 or 22.
The product has no marking since there is no internal ignition source. The
inside is to be considered a simple filter/silo and does not fall under the scope
of the directive 94/9/ EC.*
*Source: ATEX working group considerations; "How should the directive be
applied to filter units and vented silo bins."

Permitted materials

NOTE!
It is of the utmost importance to know the properties of the extracted
material.
E-PAK 150 DX/300 DX/500 DX is intended to be a part of an extraction
system collecting material with the following properties:
• MIE (Minimum Ignition Energy): See the product identification plate.
• MIT (Minimum Ignition Temperature): See the product identification
plate.
.....................................................................................
......................................................................................................
...............................................................................
....................................................................................
.................................................................................
.....................................................................................................................
.....................................................................................................................
...............................................................................
............................................................................................
.....................................................
..............................................................
......................
...............................................
................................................
.....................................
.........................
.......................
..................................................................
..........................................................
38
38
39
39
39
39
39
40
40
40
41
41
42
42
43
43
44
44
44
44
44
44
47