User Information; Safety Instructions; Authorized Users; Equipment Required - Bosch EPS 708 Instrucciones De Montaje

2.

User information

2.1 Important notes
Important information on copyright, liability and
warranty provisions, as well as on equipment users
and company obligations, can be found in the separate
manual "Important notes on and safety instructions for
Bosch Diesel Test Equipment". These instructions must
be carefully studied prior to start-up, connection and
operation of the EPS 708 and must always be heeded.
2.2

Safety instructions

All the pertinent safety instructions can be found in
the separate manual "Important notes on and safety
instructions for Bosch Diesel Test Equipment". These
instructions must be carefully studied prior to start-up,
connection and operation of the EPS 708 and must
always be heeded.
2.3

Authorized users

Installation and/or service work is only to be performed
by qualified and trained Service personnel from Robert
Bosch GmbH or organizations commissioned by Robert
Bosch GmbH. No warranty claims will be accepted
if devices have been opened or modified by non-
authorized persons. Electrical systems and equipment
are only to be started up if they are in proper working
order (refer also to EDIS information 200108_084).
This requirement is deemed to have been fulfilled if
compliance with the rules of electrical engineering
practice is ensured on completion of modification
or service work (original inspection). This involves
the performance of testing of the type and extent
specified in the rules of electrical engineering practice
(in Germany e.g. BGV A3). In Germany, the nature and
extent of testing are specified in VDE 0701/0702 Part 1.
The corresponding legislation of the country concerned
must be observed.
Important information on copyright, liability and
warranty provisions, as well as on equipment users
and company obligations, can be found in the separate
manual "Important notes on and safety instructions for
Bosch diesel test equipment". These must be carefully
studied prior to start-up, connection and operation of
the product and must always be heeded.
!
Heed the handling instructions relating to ESD when
working on open devices. These instructions can be
found in EDIS under "Bosch Test Equipment >> Test
systems AZ >> General information >> Safety".
Robert Bosch GmbH
User information | EPS 708 | 29
2.4

Equipment required

R
General tools for mechanics and electricians
R
Hose for filling chiller.
Threaded connection at chiller = G3/8".
R
Rotating field meter
R
Industrial truck (to be provided by the operator)
R
Spirit level for alignment purposes
R
Pressure sensor 1 681 032 095
R
High-pressure pump 1 687 222 188 (containing:
High-pressure pump 0 445 020 105, clamping
bracket 1 681 321 318 and drive flange
1 685 702 088)
2.5

Information on documentation

These instructions describe initial commissioning of
the EPS 708.
They are intended as a supplement to the EPS 708
operating instructions and must be kept and distributed
together with these.
en
|
1 689 978 559 2017-12-08