Countdown Timer Sub Mode; How To Set The Countdown Timer - Suunto MARINER Guía De Usuario

Note: When the stopwatch sub mode is activated, the stopwatch will continue and remain in the background if the user
is in other modes or sub modes. The user can identify the stopwatch is still activated by the flashing text "stopwatch" in
Field 3.

3.4 COUNTDOWN TIMER SUB MODE

In the TIME mode, PRESS the [Select] button three times to enter this sub mode.
In the countdown timer sub mode (Fig. 12):
• Field 1 displays the seconds,
• Field 2 displays the current time, and
• Field 3 displays the hour and minutes and to the bottom far right the text "timer".

3.4.1 How to Set the Countdown Timer

1. PRESS the [Select] button and hold in for 2 seconds. Located in Field 1, the seconds will begin to flash.
2. PRESS the [+] button to scroll the seconds upward or
PRESS the [-] button to scroll the seconds downward.
3. At the seconds desired, PRESS the [Select] button to move to the next setting. Located on right of Field 3, the minutes
will begin to flash.
4. PRESS the [+] button to scroll the minutes upward or
PRESS the [-] button to scroll the minutes downward.
5. At the minutes desired, PRESS the [Select] button to move to the next setting. Located in the center of Field 3, the hour
will begin to flash.
6. PRESS the [+] button to scroll the hour upward or
PRESS the [-] button to scroll the hour downward.
7. At the hour desired, PRESS the [Mode] button to accept the changes and exit the set up program.
The countdown timer setup is complete.
17