Eaton xChargeIn Serie Manual De Instalación página 271

xChargeIn
Product designation (example)
20 A
Socket
4 m cable
6 m cable
Type 2
Authorization
None
RFID
Key-operated switch
Energy meter
None
Energy meter (not calibrated)
Calibratable energy meter (MID
Suitable for measurement and calibration law
(Germany)
Protocols / interfaces
No protocol
UDP, Modbus TCP
No interface
X1/X2
X1/X2, Ethernet LSA+
X1/X2, Ethernet LSA+, WLAN, 3G
X1/X2, Ethernet LSA+, WLAN, 4G
Country version
None
Shutter
1)
MID: Measuring Instruments Directive
Variants with energy meter
The energy meter measures only the energy that is actually output. The en-
ergy for the charging station's internal power supply is not recorded by the
energy meter.
Energy meter, not calibrated: Variants with this option may only be used
for informative analysis of energy consumption. Due to the lack of accuracy
verification, these devices must not be used for energy billing.
Calibratable energy meter: Variants with this option are authorized for the
measurement of active energy for billing purposes (in accordance with MID
2014/32/EU or specified national regulations). For these devices, there is an
identifier of the approval on the type plate. The associated type examination
Installation manual V1.05
© EATON
EVC
1)
)
Description of the charging station
-M- 32 S 2
20
S
4
6
2
R 2 3 5 0
x
0
R
K
x
0
2
3
4
x x
0
3
0
1
2
5
6
x
0
S
271