Displays And Operating Elements; Led Bar; Display (Optional) - Eaton xChargeIn Serie Manual De Instalación

Displays and operating elements

5 Displays and operating elements
5.1

LED bar

Fig. 5-10: Segments of the LED bar
The LED bar provides visual information about the current operating status
of the charging station. It consists of 4 segments
up or flash, together or individually, in various colors.
The LED bar is only visible with activated power supply.
5.2

Display (optional)

Devices with energy meters (xChargeIn S Series and M Series) have a (dot
matrix LED) display.
Fig. 5-11: Display
The display may show different information depending on the operating sta-
tus (e.g., software version, IP address, authorization request). The main
task, however, is to display the status of the internal energy meter. During
periods of inactivity, the display brightness is reduced and switched off after
a few minutes.
The display lights up through the housing and is only visible when the power
supply is active.
274
xChargeIn
(S1 to S4), which can light
Installation manual V1.05
© EATON