Cable / Socket; Ambient Conditions - Eaton xChargeIn Serie Manual De Instalación

xChargeIn
Power loss
Socket:
Cable (4 m):
Cable (6 m):
Supply terminals
Type:
Cable feed:
Connection cross-section of the supply:
●
●
Cross section:
●
●
AWG:
Stripping length:
Temperature rating:
12.3

Cable / Socket

Cable versions:
(For rating, see rating plate on the cable)
Socket variants:
12.4

Ambient conditions

Use:
Access limitations at set-up location:
Installation (stationary):
Operating temperature:
●
●
Storage temperature:
Installation manual V1.05
© EATON
16 A rated current:
32 A nominal current:
Rigid / flexible:
Flexible with wire end sleeve with / with-
out plastic sleeve:
16 A:
32 A:
20 W at 22 kW
70 W at 22 kW
100 W at 22 kW
Spring-type terminal
Top (surface), back side (flush)
Minimum cross-section (depending on the
cable and the type of installation)
2
5 x 2.5 mm
2
5 x 6.0 mm
2
0.2 – 16 mm
2
0.25 – 10 mm
24 – 6
12 mm
105 °C
● Type 1 cable: up to 32 A / 230 V AC in
accordance with EN 62196-1 and SAE-
J1772
● Type 2 cable: up to 32 A / 400 V AC in
accordance with EN 62196-1 and VDE-
AR-E 2623-2-2
● Type 2 standard socket: 32 A /
400 V AC in accordance with
EN 62196-1 and VDE-AR-E 2623-2-2
● Type 2 standard socket: 32 A /
400 V AC in accordance with
EN 62196-1 and VDE-AR-E 2623-2-2
with Shutter
Inside and outside area
Limited and unlimited access
On the wall or on a floor-mounted column.
-25 °C to +50 °C (without direct sunlight)
-25 °C to +40 °C (without direct sunlight)
-25 °C to +80 °C
Technical data
309