Eaton xChargeIn Serie Manual De Instalación página 295

xChargeIn
DIP switch
DSW1.2
DSW1.3
Adjust current - DSW1.6 to DSW1.8
Information
Only one maximum value, which is smaller than or equal to the operating
current according to the type plate, can be set with the DIP switches.
DIP switch
DSW1.6
DSW1.7
DSW1.8
DSW1.6
DSW1.7
DSW1.8
DSW1.6
DSW1.7
DSW1.8
DSW1.6
DSW1.7
DSW1.8
DSW1.6
DSW1.7
DSW1.8
DSW1.6
DSW1.7
DSW1.8
Installation manual V1.05
© EATON
Function
Switching the function of the switching contact
output X2.
DSW1.2 ON: X2 as contactor monitoring
DSW1.2 OFF: X2 as charging status indicator
For details, see 7.5 Switch contact output
Enable UDP interface (SmartHome).
Only available for xChargeIn S Series and
M Series.
For details, see "UDP Programmer's Guide".
Current rating
10 A
13 A
16 A
20 A
25 A
32 A
Configuration
Illustration
X2.
Illustration
295