Software Update; Replace The Sim Card; Changing The Cylinder Lock - Eaton xChargeIn Serie Manual De Instalación

xChargeIn
10.3

Software update

It is recommended to always keep the charging station up-to-date, as it con-
tains functional enhancements and bug fixes. A software update is available
on our website:
www.eaton.com/evc
The information and instructions for the current software package from the
associated release notes must also be observed.
To perform the software update via USB or the network connection to
xChargeIn A Series, X Series and S Series, the instructions are included in
the *.zip file. For xChargeIn M Series, the configuration manual must also be
observed.
Information
A software update process on the charging station is indicated by a slow or-
ange flashing of the LED bar.
10.4

Replace the SIM Card

To replace the SIM card, proceed as follows:
1) Remove the existing SIM card from the card slot (see
2) Insert the new SIM card into the card slot (see
10.5

Changing the cylinder lock

Device versions with key switch have a cylinder lock installed as standard.
To replace the cylinder lock, the following tools are required:
●
●
A new cylinder lock must meet the following requirements:
●
●
●
Installation manual V1.05
© EATON
the SIM card).
card).
Matching key for the cylinder lock
Thin object for twisting the lock nose
Profile half cylinder according to EN 1303 or DIN 18252
Adjustable lock nose
Dimensions (in mm) according to the illustration. Dimension A = 30 mm
Maintenance
8.2.2 Removing
8.2.1 Inserting the SIM
305