Options - Eaton xChargeIn Serie Manual De Instalación

xChargeIn
4.6

Options

This chapter lists the possible options of the charging station.
4.6.1 RFID
The RFID reader is used for the non-contact authorization of a charging
process with MIFARE cards or tags according to ISO 14443 and ISO 15693.
Fig. 4-8: RFID
4.6.2 Key switch
The key switch is used for authorizing a charging process with a key.
Fig. 4-9: Key switch
4.6.3 Mobile network communication (only xChargeIn M Series)
In order to be able to communicate with a higher-level OCPP backend in a
charging network, the charging station can optionally be equipped with a mo-
bile network interface.
Installation manual V1.05
© EATON
1 ... RFID reader
1 ... Key switch
Description of the charging station
273