Use; Information On Use - Ottobock HR2233 0000 K Instrucciones De Uso

3
Installing the tilt adjustment mechanism
► While the tripod spring is depressed, slide the slide-in module into the adapter until the tripod spring engages
in the hole (see fig. 4, item 1).
As you do so, pay attention to the alignment of the tilt adjustment mechanism: Align the tilt adjustment mechan­
ism towards the back with respect to the direction of travel (see fig. 5, item 1).
4

6 Use

6.1 Information on use

CAUTION
Failure to check for proper functioning
Falling, tipping over of the user due to lack of maintenance
► In the interest of the user's safety, check the product for correct function before each use.
► Please also read the instructions in the section "Maintenance" > "Maintenance intervals".
CAUTION
Uncontrolled driving behaviour, unexpected sounds
Falling, tipping, collision with people or nearby objects due to defects
► If any faults, defects or other hazards that can lead to personal injury are detected, the product must be taken
out of service immediately. This includes uncontrolled (driving) movements as well as sounds that are unex­
pected or previously not noted or odours that deviate significantly from the state of the product at the time of
delivery.
► Please contact your authorised dealer.
INFORMATION
Please also observe the safety instructions in the section "Safety" > "Safety instructions for use".
HR2233=0000_K
5
Use
21