Instructions For Use; Preparation For Use; Mounting The Sliding Adapter - Ottobock 6A53 Instrucciones De Uso

single components ( ), single components with minimum order quantities
( ) or single-component packs ( ):
Fig. No.
–
1 –
Fig. No.
–
2 –
2

5 Preparation for Use

CAUTION
Incorrect alignment or assembly
Injuries due to fall resulting from damaged prosthesis components
► Observe the alignment and assembly instructions.

5.1 Mounting the Sliding Adapter

CAUTION
Improper assembly of the screw connections
Fall due to breakage or loosening of the screw connections
► Clean the threads before every installation.
► Apply the installation torques provided.
► Observe the instructions for securing the screw connections and the
use of the correct length.
Adjusting the Sliding Adapter and Mounting the Pyramid Adapter
A pyramid adapter adjustable in 1 mm increments is located on the side of
the sliding adapter with the serrated surface. The pyramid adapter can be
aligned proximally or distally as desired.
Required tools and materials:
>
710D4 Torque Spanner, 636K13 Loctite® 241
1) Align the sliding adapter in the desired displacement direction (a – p or
m – l).
6A53 Sliding Adapter
Quant Designation
ity
– 1

Instructions for Use

– 1 Sliding Adapter
6A54 Sliding Adapter
Quant Designation
ity
– 1 Instructions for Use
– 1 Sliding Adapter
– 4 Grub Screw
Reference number
647G763
–
Reference number
647G763
–
506G3=M8x12
Ottobock | 11