Jøtul F 262 Instrucciones Para Instalación página 13

Lift the baffle (Fig. 28 A) up carefully.
1.
Remove one of the side burn plates (Fig. 28 E) by lifting
2.
them up a little and then out. (Be aware if using tools, that
vermiculite plates may be damaged by rough handling).
3. Remove the baffle.
4. Remove the other side burn plate.
5. Unscrew the M8x25 mm screw on the rear burn plate
(Fig. 28 F) and remove the burn plate.
Then lift up and remove the inner bottom plate (Fig. 28 C).
6.
Follow the same procedure for installation, but in the opposite
sequence.
6.2 Changing the baffle / deflectors
Follow step 1 -3 under Fig. 28.
•
Access is then easy to the smoke deflectors (Fig. 28 B) if they
•
need to be removed. They are situated on 1 knob on the side
and on the air manifold (fig. 28 D).
• Edge them down and remove them through the door.
For re-installation follow the same procedure in the opposite
sequence.
6.3 Adjusting the base door
Fig. 29
E
F
C
A
B
6.4 Changing the glass in the side
panels
If needed the glass in the side panel can be replaced.
Fig. 30
1.
Remove the base door by pressing against the rear of
the hinge.
Fig. 31
D
C
If rear smoke outlet:
1. Gently lift the top plate (Fig. 31 A), top grid (Fig. 31 B) and
the bowl.
Remove the pin (Fig. 31 C) and the clip (Fig. 31 D).
2.
If top smoke outlet:
Gently lift the top plate (Fig. 31 A) and top grid (Fig. 31 B).
1.
2. Turn the top plate and top grid approx. 60°.
3. Let the top plate and top grid rest on the stove.
Remove the pin (Fig. 31 C) and the clip (Fig. 31 D).
4.
ENGLISH
B A
13