Daily Use - Jøtul F 262 Instrucciones Para Instalación

ENGLISH
If soapstone top:
Fig. 23
1. Place the soapstone top (Fig. 23 A) on the guiding warts
(Fig. 23 B).
Place the steel cover (Fig. 23 C).
2.
4.6 Mounting the fireplace set
Fig. 24
A
B
Mount the bracket (Fig. 24 A) to the door with the screws
1.
(Fig. 24 B).
10
4.7 Control of functions
When the product is set up, always check the control functions.
These shall move easily and function satisfactorily.
C
A
The product is equipped with one handle. This handle controls
both the ignition vent and the air vent.
•
B
•

5.0 Daily use

Odours when using the fireplace for the first time
When the fireplace is used for the first time, it may emit an
irritating gas which may smell slightly. This happens because
the paint dries.The gas is not toxic but the room should be
thoroughly ventilated. Let the fire burn with a high draught until
all traces of the gas have disappeared and no smoke or odours
can be detected.
5.1 Operation
Heating advice
NB: Logs that have been stored outdoors or in a cold room should
be brought indoors 24 hours before use to bring them up to room
temperature.
There are various ways of heating the stove but it is always
important to be careful about what you put in the stove. See the
section on "Wood quality".
Pulled out completely (the label visible): Ignition.
Pushed in (the label not visible): Air vent.