Fein FSC1.6X Manual De Instrucciones página 15

3 41 01 120 21 0.book Seite 15 Dienstag, 10. März 2009 10:19 10
FSC1.6X/FSC1.6Q/FSC2.0Q
Changing the tool.
The application tool can be fastened offset in 30° steps for adjusting convenient
working positions.
Attaching or changing the cutting blade.
FSC1.6X (Fig. 6).
Before mounting or replacing
WARNING
application tools or accesso-
ries, pull the power plug. This preventive
safety measure rules out the danger of inju-
ries through accidental starting of the
power tool.
For all work or when chang-
WARNING
ing application tools, always
wear protective gloves. Danger of injury
from the sharp edges of the application
tools. Application tools can become very
hot while working. Danger of burns!
Each time before using, also sharpen new
blades with a sharpening stone at the low-
est oscillating frequency.
Unscrew the clamping screw.
Clean the tool holder, the applica-
tion tool and the clamping screw.
FSC1.6Q/FSC2.0Q (Fig 7).
Before mounting or replacing
WARNING
application tools or accesso-
ries, pull the power plug. This preventive
safety measure rules out the danger of inju-
ries through accidental starting of the
power tool.
For all work or when chang-
CAUTION
ing application tools, always
wear protective gloves. Danger of injury
from the sharp edges of the application
tools. Application tools can become very
hot while working. Danger of burns!
Insert the application tool exactly
into the tool holder. Pay attention that
the application tool faces flush.
Tighten the clamping screw using
the supplied Allen key.
Fig 6
Tod holder
Allen key
Each time before using, also sharpen new
blades with a sharpening stone at the low-
est oscillating frequency.
When changing application
CAUTION
tools with sharp cutting
edges, use cover 3 21 74 011 00 0 to pro-
tect yourself against hand injuries.
Protect your hand and fin-
CAUTION
gers from being bruised/
crushed from the snapping back clamping
lever. The clamping lever pivots back pow-
erfully due to the spring force.
en
Clamping
screw
15