Fein FSC1.6X Manual De Instrucciones página 8

3 41 01 120 21 0.book Seite 8 Dienstag, 10. März 2009 10:19 10
en
Intended use of the power tool.
This power tool is intended for commercial
use in industry and trade, using the application
tools and accessories recommended by FEIN.
FSC1.6X/FSC1.6Q:
for trimming plastic beads, e. g. in the vehi-
cles sector,
Operation of the power tool off power generators.
Operate the power tool only off
a.c. generators with sufficient power
output that do not have any distortion of
the voltage curve.
Symbols.
Symbol Term, meaning
Action
Do not touch the saw
blade.
Warning against sharp edges of application tools, such as the cutting
edges of the cutter blades.
General mandatory
sign
Read documentation
Use eye-protection
Wear ear protection
Use dust mask
Use eye-protection,
ear protection and
dust mask
8
FSC1.6X/FSC1.6Q/FSC2.0Q
FSC2.0Q:
for sawing thin sheet metal, wood and plas-
tic parts,
and for sanding smaller areas, corners and
edges
for cutting out elastic sealants and marble
trass joints,
Operating the power tool
WARNING
off power generators
whose no-load speed exceeds the voltage
value on the type plate of the power tool is
prohibited.
Explanation
Action to be taken by the user
Danger of sharp application tools moving
back and forth.
Follow the instructions in the adjacent text!
Be absolutely sure to read the enclosed
documentation such as the Instruction
Manual and the General Safety Instructions.
Use eye-protection during operation.
Use ear protection during operation.
Use a dust mask during operation.
Use eye-protection, ear protection and dust
mask during operation.