Appendix; Overview Of Individual Symbols; System Impedance Overview Tables; Spare Parts - salmson Control EC-L Instalacion Y Puesta En Servicio

English
• On-site support from Salmson Customer Service
• Inspection or repair of the switchgear at the
factory
Please note that you may be charged for some
services provided by our customer service! For
more details, please contact Salmson Customer
Service.

12. Appendix

12.1. Overview of individual symbols

There is at least one current (not acknowledged)
error message
Operating mode: "Drain"
The water level has fallen below the dry run level
Pumps have switched off due to opening of the
contact at the "External off" input
The device communicates with a Fieldbus system
Operating mode: "Fill"
The water level has risen above the high water level
Parameter entry not possible:
1. Parameter entry/change blocked
2. Called menu is only a value display
1x symbol per pump: Pump is available and ready
for operation
1. Symbol lights up: Pump is in operation
2. Symbol blinks: Pump fault
One pump is defined as a standby pump
Stand-by: The switchgear is switched on and ready
for operation; no pump is switched on

12.2. System impedance overview tables

System impedances for 3~400 V, 2-pole, direct starting
Power System impedance
kW
2.2
2.2
2.2
2.2
3.0
3.0
3.0
3.0
4.0
62
Connections/h
ohms
0.257 12
0.212 18
0.186 24
0.167 30
0.204 6
0.148 12
0.122 18
0.107 24
0.130 6
System impedances for 3~400 V, 2-pole, direct starting
Power System impedance
kW ohms
4.0 0.094
4.0 0.077

12.3. Spare parts

Spare parts can be ordered from Salmson
Customer Service. To avoid return queries and
incorrect orders, the serial and/or article number
must always be supplied.
Subject to change without prior notice!
Wilo Salmson France SAS 03-2017 V05 DIN A4
APPENDIX
Connections/h
12
18