Introduction; For Your Safety - SICE S 60 Uso Y Mantenimiento

INTRODUCTION

The purpose of this manual is to provide the instructions necessary for optimum operation,
use and maintenance of your machine. If the machine is resold, provide this manual to
the new owner. Furthermore, ask the new owner to fill out the ownership transfer module
attached to the previous page in the manual and send it to Constructor, so that Constructor
will be able to provide the customer with all necessary safety information.
This manual assumes that the technicians are in possession of all the knowledge necessary for
the identification and maintenance of rims and tyres. Technicians must also have a thorough
knowledge of the functions and safety characteristics of all the specific tools used (such as
the rack, lift or jack), and a sufficient understanding of all manual or electric tools necessary
to be able to work in safety.
The first section provides basic information about safe operation of the S60 tyre changer
family. The following sections of this manual contain detailed information regarding the
equipment, operating procedures and maintenance. "Italics" are used to refer to specific
parts of this manual that provide additional information or explanation.
These references should be read for additional information to the instructions being pre-
sented.
The owner of the tyre changer is the only person responsible for the observance of the
safety procedures and the organisation of technical training. The tyre changer must only be
used by qualified, specifically trained technicians. The owner or management is exclusively
responsible for storing the documentation relative to qualified personnel.
The S60 family of tyre changers has been created for the mounting and demounting of in-
dustrial vehicle tyres (trucks, buses, tractors and earth moving vehicles) with a maximum
external diameter of 3000 mm-118" and a maximum width of 1800 mm-71" .
Additional copies of this manual and the documentation enclosed with the machine can be
requested from Constructor, specifying the machine type and serial number.
NOTICE: Design details are subject to change. Some illustrations may vary slightly in ap-
pearance from the machine you have."

FOR YOUR SAFETY

The following points define the hazard levels regarding the equipment, associated with the
warning captions in this manual:
DANGER: Immediate hazards that could cause serious injury or death.
DANGER:
60
DANGER
Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
User Manual S60