GENERAL WARNINGS AND INSTRUCTIONS
Avoid Personal Injury. Carefully read, understand and follow the warnings and instruc-
tions given in this manual. This manual is an essential part of the product. Keep it with
the machine in a safe place for future reference.
1. If the maintenance procedures described in this manual are not executed correctly, or
if other instructions in the manual are not observed, accidents could occur. This manual
makes continuous reference to the possibility that accidents can occur. Any accident could
cause serious or fatal injuries to the operator or people nearby, or cause material damage.
2. Never attempt to mount tyres and rims that do not correspond. It is very dangerous. Tyres
and rims that do not correspond could explode,
causing accidents.
3. Only the bead insertion operation is permitted on
the tyre changer, without exceeding a pressure of 0.5
bar.
4. To inflate the tyre, remove it from the tyre changer
and place it in the inflation cage
5. Do not use inflation devices (e.g. pistols) connected
to the tyre changer using external power supply to
the machine.
6. Never bring your head or other body parts close to
a tyre during bead insertion. This machine is not a
safety device against the possible explosion risk of
tyres, air chambers or rims.
7. Maintain a suitable distance from the tyre changer during bead insertion, do not approach
it.
A bursting tyre can cause projections of its parts in surrounding areas with a force
sufficient to cause serious injury or death.
Do not mount a tyre if its dimensions (indicated on the side) do not correspond
exactly with the rim dimensions (printed inside the rim) or if the rim or the tyre
are defective or damaged.
The tyre changer is not a safety device and does not prevent tyres and rims from
exploding. Keep other people at a distance
8. Risk of crushing. Presence of moving parts. Contact with moving parts
could result in an accident.
• The machine may only be used by one operator at a time.
• Keep all bystanders clear of tire changer.
• Keep hands and fingers clear of rim edge during the demounting
and mounting process.
62
CAUTION!
DANGER
User Manual S60