Accessories Included With The Machine; Specified Conditions Of Use - SICE S 60 Uso Y Mantenimiento

ACCESSORIES INCLUDED WITH THE
- Code 219244 Rim pliers
The locking grip, when fixed firmly to the rim edge prior to mounting, makes it easier
to lift the tyre, insert it into the rim well and keep it in position.
- Code 2105954 Bead lifting lever
The bead lifting lever keeps the bead in position on the tool when demounting
agricultural wheels.
- Cod.5_122184 Set of 4 stems with clamp 5"
The set of 4 clamp stems is used for rims without cover or that have a diameter greater
than 50". The maximum operating capacity is 60".
- Code 426388 side ring lever

SPECIFIED CONDITIONS OF USE

The S60 tyre changer is designed exclusively for tyre mounting and demounting.
Any use of the machine other than the described use is to be considered as improper
and unreasonable.
The manufacturer does not intend the machine to be used for inflation operations.
If the operator decides to proceed with partial bead insertion in the tyre on the machine
using his own equipment, a pressure of 0.5 bar must NOT be exceeded (unless the tyre
manufacturer does require lower pressure levels). In any case, the current standards in
force in the country where the tyre changer is used must be observed.
It is forbidden to use compressed air or water jets to clean or wash the wheels mounted on
the machine.
Use only original equipment and accessories.
72
MACHINE
CAUTION!
DANGER
CAUTION!
CAUTION!
User Manual S60