7. Dry the jug.
8. Carefully reinsert the jug into the appropriate compartment of the espresso
machine making sure not to spill the water inside the machine.
9. Reinsert the silicone tube into the appropriate hole of the jug.
10. Reposition the panel 12 fig.2.
3.2 Water to use
It is recommended to use bottled mineral water with a low content of mineral
salts to prevent scale formations in the jug and in the hydraulic circuit of the
machine which lead to malfunctioning or blocking.
4. Espresso coffee brewing
NOTE
In order to always obtain a good coffee it is necessary to keep the filter holder
(10 fig.2) always inserted in the brew unit (9 fig.2) to always keep it at the
correct temperature.
To prepare the espresso coffee, follow the procedure below:
• Unhook the filter holder, making sure not to grip hot metal parts.
• Clean the filter inside the filter holder from any residual coffee.
• Then load the filter with fresh ground coffee at the right grinding point (1
dose of coffee for the single filter, 2 doses of coffee for the double filter).
| 61