Troubleshooting - Stryker SofCare Manual De Operación Y Mantenimiento

Problem
Loss of power
Patient is bottoming out
Air cells fail to inflate
www.stryker.com

Troubleshooting

Solution
Check if the plug is connected to mains.
Pressure setting might be inadequate for the patient. Adjust comfort range 1 to 2
levels higher and wait for a few minutes for best comfort.
Make sure the air hose is not kinked, cracked, or split. Verify that the power switch
is illuminated, signifying the control unit has power. Verify that the air hoses are
fully inserted with a positive connection.
476005-5210 V1.6
Return To Table of Contents
13