Device Controls And Indicators; Storage, Handling And Removal Instructions; Storage And Handling; Removal Instruction - Stryker F-SFHPBER Manual De Instrucciones

INSTRUCTIONS FOR USE
Step 14:
Intraoperative adjustments
a. Disconnect intubation tube and feed through opening in mask and C-
prone.
b. Fold mirror down for suction.
c. Release latches and shift C-Prone after Flex-Frame articulations.

Device controls and indicators:

Controls and indicators of this device are described within the Setup instructions.

Storage, Handling and Removal Instructions:

3.4.1

Storage and Handling:

The product should be stored in a clean and safe environment to prevent product
damage.
3.4.2

Removal Instruction:

1. Push the white clamp locks down to unlock.
2. Pull up firmly on the clamp latches to release.
3. Ensure both latches are released during removal.

Troubleshooting Guide:

This device does not have a troubleshooting guide. For technical support user
of the device shall first contact his or her supplier.

Device Maintenance:

Make sure that all labels are installed and can be read. Replace labels as
necessary by using a plastic scraper to remove the label. Use an alcohol wipe
to remove any adhesive residue.
Contact Allen Medical Systems, Inc. if you need to repair or replace the
device contact us using the information from the contact details section (1.3).
Document Number: 80028212
Version: A
Page 15
Issue Date: 25 MAR 2020
Ref Blank Template: 80025118 Ver. E