Vetus Follow-Up Manual De Manejo Y Instrucciones De Instalación página 21

Moveable control unit
The same operations can be carried out with a moveable con-
trol unit as with one which is permanently mounted at a steering
position.
Connecting
Put the plug in the socket and lock it by turning the ring a quar-
ter turn clockwise.
Always close the socket with the cap when the operating
unit is not in use!
Mini handle
The mini handle is operated in exactly the same way as the
permanently mounted handle.
Push button 'Stand-by'
- Switching the Follow-Up steering on and off
- Rudder calibration, together with the 'Set' button
Push button 'Set'
- Changing steering position, taking over
- Setting rudder trimming
- Rudder calibration, together with the 'Stand-by' button
All the operations described below for the permanently mount-
ed handle can be carried out in exactly the same way with the
moveable handle.
Follow-Up Steering System Follow-Up Steering System
HANDLE
FUM0026
'STAND-BY'
FUM0028
Only those handles which are connected to the
electronic control unit when the power is swit-
ched on will function!
Therefore put the plug of the moveable operat-
ing handle in the socket before switching on the
power supply.
LED
FUM2025
FUM0029
FUM0027
'SET'
100901.02
21