Custom Stitch Adjustment - Janome Memory Craft 4900 Manual De Instrucciones

z
x
c
Custom stitch adjustment (Mode 2 and 3 only)
The stitch width and length can be individually altered for
each pattern in the programmed combination.
Example: To alter the stitch width and length of a single
pattern in the combination
z Press the edit key to shift the cursor under the pattern
you wish to alter.
x Press the stitch width adjustment key to reduce the
width to "5.0".
* The stitch length of the pictorial patterns will
proportionally change by pressing the stitch width
adjustment key.
However, you can alter the stitch length with the stitch
length adjustment key as desired.
NOTE:
To view the stitch setting of each pattern, shift the cursor
under the desired pattern then press the stitch width or
length adjustment key. The settings will be displayed at the
bottom center of the LCD screen.
If you press the stitch width or length adjustment key when
the cursor is at the right of the last programmed pattern,
the custom adjustment will be canceled and uniform
adjustment will be applied.
148