Pattern Elongation; Programming A Pattern Combination With An Elongated Pattern - Janome Memory Craft 4900 Manual De Instrucciones

q w
33
X1 X2 X3
z
3 3
x
c
3 3
v
b
e
X4 X5
138

Pattern Elongation

Machine settings
q Stitch pattern
w Presser foot:
e Thread tension:
Patterns number 31–47 (mode 2) can be elongated.
31 32 33 34 35 36
39 41 42 43 44
40
Example: Pattern 33
Select pattern 33 (mode 2).
Press the elongation key to change the elongation ratio.
Elongation ratio is indicated in multiples of the original
pattern length.
Start to sew.
NOTE:
If you press the auto-lock button while sewing a pattern,
the machine will stop automatically after the current pattern
is completed.
Programming a pattern combination with an
elongated pattern
Example: Programming pattern 33 and its elongated
image.
z Select pattern 33 in the mode 2.
x Press the memory key.
c Select pattern 33 in the mode 2.
v Press the elongation key to change its elongation ratio
to X2.
b Press the memory key. Start sewing.
NOTE:
If you press the auto-lock button while sewing, the machine
will stop automatically after the current pattern is
completed.
33 (mode 2)
Satin stitch foot F
AUTO
38
37
45 46 47