Settings Menu - Wilo Stratos MAXO Serie Instrucciones De Instalación Y Funcionamiento

en
174
Setting the control functions

Settings menu

Heating/cooling temperature sensor
Only visible if automatic switchover is se-
lected in "Heating & Cooling" and "Heat-
ing/cooling switchover" settings assist-
ant.
Delivery head setpoint
Visible for active control modes, which re-
quire a delivery head as setpoint.
Setpoint volume flow (Q-const)
Visible for active control modes, which re-
quire a volume flow as setpoint.
Feeder pump correction factor
Visible for Multi-Flow Adaptation, which
offers a correction value.
Setpoint temperature (T-const)
Visible for active control modes, which re-
quire an absolute temperature as set-
point.
Setpoint temperature (ΔT-c)
Visible for active control modes, which re-
quire an absolute temperature difference
as setpoint.
Setpoint speed
Visible for active control modes, which re-
quire speed as setpoint.
Setpoint PID
Visible for user-defined control.
External setpoint source
Visible if an external setpoint source (ana-
logue input or CIF module) was selected
previously in the context menu.
Selection of secondary pumps
Visible for Multi-Flow Adaptation.
Volume flow offset
Visible for Multi-Flow Adaptation.
Temperature sensor T1
Visible for active control modes, which re-
quire a temperature sensor as actual value
(constant temperature).
Temperature sensor T2
Visible for active control modes, which re-
quire a second temperature sensor as ac-
tual value (difference temperature con-
trol).
Free sensor input
Visible for user-defined control.
External delivery head sensor
Visible for index circuit evaluator Δp-c,
which requires a differential pressure as
actual value.
Description
controlling of "Heating and cooling" is
queried.
Setting the temperature sensor for auto-
matic switchover between heating and
cooling.
Setting the setpoint of the delivery head
H for the control mode.
Setting the volume flow setpoint for the
control mode "Volume flow Q-const"
Correction factor for the volume flow of
the feeder pump in the control mode
"Multi-Flow Adaptation".
Setting the setpoint of the temperature
for the control mode "Constant Temper-
ature (T-const)".
Setting the setpoint of the temperature
difference for the control mode "Constant
Temperature Difference (ΔT-const)".
Setting the setpoint of the speed for the
control mode "Constant Speed (n-
const)".
Setting the setpoint of the user-defined
control via PID.
Linking the setpoint to an external set-
point source and setting the setpoint
source.
Selecting of secondary pumps which are
used for measuring the volume flow in
Multi-Flow Adaptation.
Small and older pumps can be supplied
with an adjustable offset volume flow in
the Multi-Flow Adaptation system.
Setting first sensor (1), which is used for
temperature control (T-const, ΔT-const).
Setting the second sensor (2, ΔT-const)
used for temperature control.
Setting the sensor for user-defined PID
control.
Setting the external sensor for the deliv-
ery head with index circuit evaluator.
WILO SE 2018-11