Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Prestaciones
Detailed Description
Tab. 337 Switch control outputs
Interface Operating sequence / signalling on the terminal Scope
A
The user obtains an acknowledgement tone every
time he activates / deactivates the feature.
Functions in prefix dialling
Tab. 338 Switch control outputs: Functions
Functions
Activate control output
Deactivate control output
1)
call number assigned to this control output in the numbering plan
Provided they have not already been defined, call numbers can be created in the
numbering plan. Numbers already created can be deleted again or changed.
Tip:
Store function code under a function key
System configuration
Tab. 339 Controlling control outputs: System configuration
Parameter
Parameter value
Switch control outputs
Yes
State
On
Aastra Intelligent Net:
In an AIN control outputs can be used as a mix of FXS interfaces and
ODAB options cards (Aastra 415/430 only). An authorized user can switch
all the control outputs, regardless of where they are located. The call
numbers of all control outputs of an AIN are defined in the numbering
plan.
524
Function codes
*74 <Call number
#74 <Call number
Remarks
User configuration
/
Off
Function code and AMS configuration are equivalent, i.e. the
change last made chronologically is the effective one.
Possible interfaces:
The function is activated locally on the sys-
tem.
Requirement:
Authorization is enabled in the user confi-
guration.
1)
>
1)
>
Funciones y prestaciones del sistema a partir de R2.1
syd-0370/1.2 – R2.1 – 07.2012
Publicidad
Tabla de contenido
