List Of Materials; Parts Included In Your Hood; Optional Accessories; Materials Required - arietta PRO001MX 30 Guía De Instalación, Uso Y Mantenimiento

Parts included in your hood

• Hood Canopy Assembly with blower, grease
filters and lamps already installed
• Care & Use /Installation Instructions
• Transition
• Fittings bag with:
4 Washers
2 Hooks with regulating screws
6 Screws 5X35
4 screws for transition
• 2 grease filters (30") or 3 grease filters (36")
Parts Not Included with your hood
• Duct Tape
• 1/2" Conduit
• Wire Nuts
• Round or Rectangular Duct.
• Round back draft damper
• Wiring clamp
• Wall fastener anchors
(for optional installation to concrete/masonry walls.)

Optional accessories

•
Duct covers
•
Ductless recirculation kit

materials required

•
Duct tape
•
Wire nuts
•
Tape to mount template
•
8" rounded metal duct (lenght to suit installation)
TOOLS REQUIRED FOR INSTALATION
Measuring tape
Knife
Spirit level
Wire cutter/stripper
Pliers
Safety glasses
Duct tape
Masking tape
CHECK INSTALLATION HARDWARE
Locate the hardware accesories box packed
with the hood
Wire nuts
Electric drill with
5/16" and 3/8" Bits
Screwdrivers:
Phillips (Posidrive) # 2
Torx # 2
9
Hammer
6 Screws 5 x 35
4 assembly screws for transition
4 Washers
2 Hooks with regulating screw
Gloves
Strain relief
8?round metal duct,
length to suit installation
Saw, jig saw or
reciprocating saw