Install Framing For Hood Support - arietta PRO001MX 30 Guía De Instalación, Uso Y Mantenimiento

Install framing for hood support

warning: This installation instruction is not prepared for
horizontal discharge
•
If drywall is present, mark the screw hole locations.
Refer to ductwork installation guidelines.
•
Cut away enough drywall to expose 2 vertical studs at
the holes location indicated by the template.
Install three horizontal supports at least
between three wall studs at the bottom mounting holes
installation location.
•
The horizontal support must be flush with the room
side of the studs.
Use cleats behind both sides of the support to secure
to wall studs.
•
Reinstall drywall and refinish.
ImPORTANT
Framing must be capable of supporting  lbs.
4" X 2"
1
8-1/2" min. opening for ductwork
4"x 2" Min. Mounting Support
Side slot (4)
Top outlet
Knockouts (junction box)
Top screw location
Square slot
Rear outlet
Bottom fixing screw location