Folding Backrest; Backrest Angle Adjustment - Ki Mobility Little Wave Clik XP Manual De Instrucciones Y Garantía

V. SET UP & USE OF YOUR WHEELCHAIR
T. Folding Backrest
To fold down the backrest on your Clik wheelchair:
1. Pull the release cable (Fig. 27:A), that is behind the back frame, outward to release the latch.
Fold downward towards the seat frame (Fig. 28).
2. To latch back into place, pull the release cable outward and the back will release and can be
pushed back into the upright position. The backrest will automatically latch onto the side
frame.
3. Ensure a solid engagement onto the latches by pulling back on on the backrest frame into the
upright position.
Fig. 27
WARNING: Do not occupy or operate chair when backrest is not latched. This may result in a
fall, tip-over or loss of control causing severe injury to the user or others.
U. Backrest Angle Adjustment
Relax Back Feature:
This chair can be adjusted for a slight recline
upon releasing the back release cable (Fig.
29:A). This is referred to as the "relax back
feature." 1°, 3° and 6° are available.
To adjust, use a 3mm Allen key to
disassemble the backrest stop (Fig. 29:A
and Fig. 29:C) and reassemble in the
desired position on both sides.
A
Fig. 28
Fig. 29
C
A
35
6°
3°
1°
B